ADAPTERS
Adapter 7011:
F VGA to 13W3 M
This is a 15-pin female VGA to 13W3 male connector. It's 2.25 inches long.
This adapter is commonly used to connect a PC monitor to a Sun, SGI or NeXT workstation.
Note: The 7011 adapter, by itself, will not make many fixed frequency monitors work with your pc. Please check our Table of monitors for information on your monitor.
Adapter 7012:
M VGA to 13W3 F
This is a 15-pin male VGA to 13W3 female connector. It's 2.4 inches long.
This adapter is commonly used for Sun, SGI, and NeXT monitors with a hardwired 13w3 connector on the back or "pig tail" to a PC.
Note: The 7012 adapter, by itself, will not make many fixed frequency monitors work with your pc. Please check our Table of monitors for information on your monitor.
Adapter 7021:
F VGA to F VGA Gender Changer
This is an HD15 female VGA to HD15 female VGA Gender changer used to convert an HD-15 male cable end to female. It's 0.7 inches long.
Adapter 7031:
M VGA
to MAC DB15 F
This is a Mac DB-15 female to HD15 male adapter commonly used for connecting a Macintosh monitor to a PC. It's 2.6 inches long.
Adapter 7001: Unimac-82D DB15 M to VGA F w/switches
This is a MAC DB-15 male to HD 15 VGA female adapter commonly used for connecting a PC monitor with an apple Macintosh. It is 2 inches long and is compatable with beige G3s and earlier Macs, not blue G3 towers or G4s. It also will not work on DVI Macs or PowerBooks. It comes with instructions for configuring.
Adapter 7041:
Sync Converter
The Sync Converter will translate standard VGA sync signals to both composite and sync-on-green output. Composite sync output is typically used on all SUN and MAC workstation monitors. Sync-on-green is typically used on all DEC, NeXT, HP, SGI, APOLLO, and IBM workstation monitors. The adapter uses an HD-15 male connector for input and an HD-15 female connector for output.
Adapter 7052:
Composite Sync Converter
The Composite Sync Converter will separate the composite sync signal from your workstation sync output back to separate vertical and horizontal sync signals to drive a standard monitor. Composite sync output is typically used on all SUN and MAC workstations. The adapter uses an HD-15 male connector for input and an HD-15 female connector for output.
Adapter 7053:
Sync Separator
The Sync Separator will convert the sync-on-green signal from your workstation video output back to separate vertical and horizontal sync signals to drive a standard monitor. Sync-on-green is typically used on all DEC, NeXT, HP, SGI, APOLLO, and IBM workstations. The adapter uses an HD-15 male connector for input and an HD-15 female connector for output. A 6VDC power adapter is included.
 |
4055 Valley Commons Drive, Suite C Bozeman, MT 59718 To Order Toll Free: (800) 547-2349 Tech Support: (406) 586-8866 FAX: (406) 586-9145 |
|
/ Products
/ Order
/ Support
/ Cables
/ Adapters
/ Sharing devices
/ Site Map
/
Copyright © 2005 Software Integrators, Inc. |
|